ACCESSORIES
Get more out of your brake! Fit a larger rotor to your bike, along with one of our sleek brake adapters.
Add some bling and shim your caliper correctly with our Titanium bolt packs!
Our Titanium mounting kit allows you to shim the caliper to the perfect height of the rotor. The included washers account for the increase in diameter of 3mm, as well as some additional wiggle room for clearance if required. This is perfect when going from a 200 to 203mm or 220 to 223mm rotor.
This kit has 17mm long bolts, specific for the PM+40 / PM+43 adapters or mounting your caliper directly to the fork or frame.
Kit Includes: Titanium Bolts (Qty 4), Thin Washers (Qty 4), Thick Washers (Qty 4)
Add some bling with our Titanium bolt packs!
Bolt Pack: Titanium Button Head Bolts - QTY 6
More control at your fingertips
A simple upgrade that improves feel, consistency, and confidence at the lever.
Radic lever grip tape is designed to increase traction between your finger and the lever blade, reducing slip in wet, muddy, or high-vibration conditions. The result is more consistent input and better control when it matters most.
Compounds: Organic
Pad Shape: Hope V4
Compatibility: Radic KAHA, Hope V4
Included: 2 brake pads (1 pair) & Separation Spring
3D Printed KAHA Adapter for SRAM Matchmaker®
Pack: 1x 3D Printed Bracket, 1x Titanium Bolt
Material:
Bolt (M5x10mm): Grade 5 Titanium
Bracket:
3D Printed Stainless Steel 316L
3D Printed Titanium Ti-6Al-4V (40% lighter than Stainless Steel 316L)
Finish: Raw
Compatibility: SRAM Matchmaker®
Custom sizes and dimensions are available upon request.
3D Printed KAHA Adapter for SHIMANO I-Spec®
Pack: 1x 3D Printed Bracket, 1x Titanium Bolt
Material:
Bolt (M5x10mm): Grade 5 Titanium
Bracket:
3D Printed Stainless Steel 316L
Finish: Raw
Compatibility: SHIMANO I-Spec®
Custom sizes and dimensions are available upon request.
Bleedkit.com’s own brand of ultra high performance oil for brake systems designed for use with mineral oil. It is environmentally friendly yet very stable for prolonged service intervals.
Extremely high initial boiling point at 360° C / 680° F
Viscosity index 200
For the most precise and consistent braking performance
Environmentally friendly, made from renewable resources
Biodegradable according to OECD301B and 100% non water pollutant
Classified as non-hazardous good according to transport regulations
Why use Gold Hydraulic Brake Fluid
Made in Germany
Compatibility: This brake oil is suitable for all brakes designed for use with mineral oils: Shimano, Magura, TRP, Tektro, Formula Cura.
Not compatible with DOT brakes (SRAM, Avid, Hayes, Hope, older type Formula).